全部

1·Should always Show filling valve patency, the timely processing of that bad situation.

应经常查看出油阀的通畅情况，发现不良情况及时处理。

2·The filling valve is high in quantitative accuracy and efficiency without dripping, adjustment, loading and unloading are easy.

灌装阀定量准确，效率高，不滴漏，调整装卸方便。

3·Principle and design keys of a flange type filling valve have been introduced with methods of installation and use as well as issues deserved notice.

介绍了法兰连接式充液阀的原理和设计要点，并介绍了安装使用的方法及应注意的问题。

4·A turbine supercharger protector is provided, which comprises an oil cylinder body 11, an oil cylinder cover 12, a piston 2, a single filling valve 3 and a piston control device.

一种涡轮增压器保护装置，它包括油缸体11、油缸盖12、活塞2、单 向进油阀3和活塞控制装置；

5·The advantages of electronic filling valve are especially focused on and the working process explained in detail with a view of being used for reference by engineers and technicians.

着重介绍现代饮料电子灌注阀系统特点，并详细分析其工作过程。可供专业设备维修技术人员和维修人员参考。

6·If the tank is not filling all the way (there should be a fill line on the inside of the tank), carefully bend the bulb of the float valve up a bit and see if the tank will fill.

如果水箱没有充满正常水量(水箱内侧应该有一条水位线)，慢慢地弯曲一下浮囊阀，看水位会不会上升。

7·The material enters the discharge hose through the one-way valve in the outlet joint. Now a filling cycle is completed.

物料通过出料接头内的单向阀门，进入出料软管，进入待灌空瓶，完成一次灌装。

8·The higher flow capacity and reduced turbulence in the valve allow the barrel filling operation on the scale to be accomplished faster and with less splashing and waste.

流动性更好了，也降低了阀门内流体的紊乱，因此灌桶过程更快，溅出浪费也更少。

9·By analysis of valve fault type and causes of liquid chlorine cylinder, this paper offers proper operation methods and counter-measures in use, filling and inspection processes.

通过对液氯钢瓶瓶阀故障类型、原因的分析，提出了在钢瓶使用、充装、检验过程中适当的操作方法和对策。

10·Product valve and filling head moving parts are protected by steam barrier. The filling chamber is sterilized by steam.

产品阀门及灌装头运动部件采用蒸汽屏障保护，灌装室采用蒸汽杀菌。