全部

1·Specialize in all metal gasket assembly of domestic engine.

是国内发动机全金属气缸垫总成的专业生产厂家。

2·Medium voltage high temperature, choose a metal and nonmetal combination gasket or metal gasket;

中压高温时，选用金属与非金属组合密封垫或金属密封垫；

3·If want to use metal gasket, it should be smooth surface narrowed, make its and gaskets of contact area is reduced.

如果要用金属垫片，则应将光滑面缩小，使其与垫片的接触面积减小。

4·In such cases, the metal gasket does not apply, because then the pressing force required is too large, resulting in greater deformation of bolts, so difficult to seal flange.

在这种场合，金属垫片也不适用，因为这时要求的压紧力过大，导致螺栓较大的变形，使法兰不易封严。

5·The pressure distribution is determined by measuring the pressure at various points between the diamond cullet faces and the thin metal gasket using the ruby fluorescence method.

利用红宝石荧光测压方法，测量了压砧砧面以及密封垫片流变区内的压力分布。

6·In such cases, a metal gasket also not applicable, because the requirements of the compaction force is too large, caused the bolts, make much deformation flange is not easy to seal.

在这种场合，金属垫片也不适用，因为这时要求的压紧力过大，导致螺栓较大的变形，使法兰不易封严。

7·When installing a pinch valve to a rubber, PVC, or any slick mating flange, we recommend that you install a metal serrated gasket between the two flanges to assist in the seal.

在安装夹管阀时，如果采用橡胶、PVC或任何“光滑的”配套法兰，则我们建议在两个法兰之间加装一个金属锯齿垫圈以增强密封效果。

8·When the gasket is placed on the block and the head installed, tightening of the head bolts squeezes the soft metal so that the joint is effectively sealed.

当气缸垫装在气缸体上，然后装上气缸盖以后，气缸盖螺栓就压紧软金属垫，这样结合处就完全密封了。

9·The condenser is a tube, elbow, metal hoses, fasteners, F4 rubber lined steel corrugated ring gasket and support component.

本冷凝器是由一组套管、弯头、金属软管、紧固件、F4橡胶内衬不锈钢波纹环垫片及支架组成。

10·Features and application relating to metal cladding gasket for pipe flanges are introduced, at the same time, basis and main contents to formulate its national standard is presented, too.

介绍了管法兰金属包覆垫片的特点、应用以及国家标准的制订依据与主要内容等。