全部

1·The digits are stored such that the most significant digit is at the head of the list.

但是要注意每个位子值与进位值的操作要写一行上，或者用临时变量储存。

2·The second memory block is used for storing other non highest significant digit of the pixel data.

该第二 内存块，用以储存该像素数据的其它非最高有效位。

3·Usually, you order them from right to left, with the right-most digit being the least significant digit.

通常，从右到左排列，最右边的数字是最低有效位。

4·The pulse generator serially outputs pulses representing digits of a digital word least significant digit first.

脉冲发生器串行地输出表示数字字的数字的脉冲，首先是最低有效数字。

5·The function that allows the elimination in the result of the calculation of all digits beyond the least significant digit.

允许消去答数中最低有效数字位以下的全部数字位的功能。

6·Note that this specifier never displays the '0' character if it is not a significant digit, even if '0' is the only digit in the string.

请注意，如果“0”不是有效数字，此说明符永不显示“0”字符，即使“0”是字符串中唯一的数字。

7·All dimensions specified are approximations only. Unless stated otherwise, the least significant digit is uncertain by plus or minus one unit.

所有特定尺寸都只是近似值。除非特殊说明，否则最不重要的数字的不确定性体现在加上或者减去一个单位。

8·Instrument accuracy is usually specified as a percent of reading, plus a percentage of range (or a number of counts of the least significant digit).

仪器的准确度通常规定为读数的百分数，加上量程的百分数(或者最低有效位的字数)。

9·To compensate for this, the least-significant digit is removed from the end of a time difference resulting in a useful, but less specific data point.

为了弥补这个缺陷，从时间差异的末尾中删除最不重要的数位，得到一个有用但特定性较低的数据点。

10·The sample circuit samples an output of the decay circuit at a sample time after the decay circuit receives the pulse for the most significant digit.

采样电路在衰减电路接收到用于最高有效数字的脉冲之后的采样时间对衰减电路的输出进行采样。