全部

1·This paper discusses the influence of water volume fraction, temperature, and time on the rheological properties of W/O emulsion.

这篇论文讨论了含水率、温度和时间等因素对 W/O 乳状液流变性的影响。

2·The proper fibre volume fraction of original is between 25% and 30%.

预制坯体的纤维体积含量选为25％至30％为最好。

3·The higher the volume fraction, the lower the proportion of yield strain is.

骨小梁的体积比越高，达到降伏应变的比例就越小。

4·Based on the simulation results, a calculation formula of ITZ volume fraction is given.

基于这些模拟结果，给出了界面体积百分比的计算公式。

5·Suitable fiber length and volume fraction are pacing factors of improving absorbing property of mortar.

适当的纤维长度和体积掺量是提高砂浆吸波性能的决定性因素；

6·When oxygen volume fraction is larger than 7%, the coal reburning process is ineffective for NOx reduction.

当氧气体积分数大于7%以后，煤粉再燃过程不再具有脱硝效果。

7·The transformed ferrite volume fraction increases and grain size decreases with the increase of cooling rate.

随着冷却速率的增加，铁素体体积分数减少，晶粒尺寸变细。

8·A volume fraction specification, f, is used to define fluid region, and to track the movement of free boundaries.

用一个体积分数F来定义流体区域，并用它来跟踪自由界面的运动。

9·However, the compression strength and plastic deformation ability decreased when the volume fraction exceeded 60%.

钨丝体积分数超过60%以后，压缩强度与塑性变形能力反而下降。

10·The specimen with larger crack length has larger volume fraction of the martensite and larger transformation zone.

马氏体的体积分数以及相变区域随着裂纹长度的增加而显著增大。