全部

1·Static open-circuit potential is practicable for metallic oxide anode stability.

用静态开路电势来评价金属氧化物电极的稳定性是可行的。

2·A simple method for calculating maximum open-circuit potential was presented when power system was in the non-full phases and swings operation.

提出了计算电力系统非全相振荡时最大断口电势的简便方法。

3·The potential of a corroding surface in an electrolyte relative to a reference electrode under open-circuit conditions.

在断路情况下，在与基准电极相关的电解液中，表面受到侵蚀的潜在可能性。

4·Advance in research on microorganism attachment and ennoblement of open-circuit-potential of passive metals in seawater.

海水环境中微生物附着与钝性金属开路电位正移现象的研究进展。

5·The open circuit voltage of the cell under dynamic operating is higher than that under steady state owe to the reduction of mixed potential caused by methanol crossover.

动态负载时电池的开路电压要比稳态运行时的高，主要原因是因甲醇窜流造成的过电势的减少。

6·Inhibitive effects of polyaniline (PANI) for the corrosion of mild steel were studied using visual observation, open circuit potential (OCP) and linear polarisation resistance (LPR).

使用外观观察、开路电位以及线性极化电阻等方法研究了聚苯胺对碳钢腐蚀的阻化作用。

7·The results show that lower open circuit potential and current efficiency, higher whiteness, better coating binding force were found when the substrate was nickel;

结果表明： 不同的电镀基材在硫酸铑体系中对其阴极极化的影响不明显； 以镍为基材镀铑时， 具有开路电势低、电流效率低、白度高、结合力好等特点；

8·Cathodic reaction rate at open circuit Potential for iron in sulfuric acid containing dichromate ion was controlled by both electron transfer process and diffusion process.

铁在含有一定浓度重铬酸根的硫酸中，自腐蚀状态下的阴极反应速率受重铬酸根阴极还原电子转移过程与扩散过程共同控制。

9·The utility model has simple structure, low cost, low open circuit losses, and high dependability, and the utility model makes the transportation of the potential transformer more convenient.

本实用新型结构简单、成本低、空载损耗低、可靠性高，同时使变压器运输更方便。

10·The open circuit potential, potentiodynamic scanning polarization and surface analysis methods were employed to investigate the effect of Cladosporium on the corrosion behaviors of A3 steel.

采用开路电位法、动电位扫描法和表面分析法研究了油-水体系中枝孢霉菌对A3钢电化学行为的影响。