全部

1·Measuring axial movement and shaft play will reduce downtimes of the system and minimise repair costs.

精确测量径向跳动和轴向移动，可以减少系统停机时间以及降低维修费用。

2·The relative axial movement of the plunger in relation to the piston causes a vacuum to be created within the plunger.

柱塞相对于活塞的相对轴向运动在柱塞内造成真空。

3·The axial movement of materials in the low-speed cylinder is analyzed and the motion formulae are reached in this paper.

本文分析了慢速滚筒内物料的轴向运动，导出了轴向运动的计算公式。

4·Through re - design to working axis system and axial movement mechanism the general 4h rolling mill can be reformed into WRS rolling mill.

对工作轴系的结构及轴向移动机构重新设计，可将普通四辊轧机改造为wrs轧机。

5·The radial compression of the pipe results in the fitting being locked in place and prevents axial movement between the fitting and the pipe.

管的径向压缩将该配件锁定 在适当的位置中并且防止配件与管之间的轴向移动。

6·From ways of assemble factors and structure of the 445-hs mill, the reason to bring out the roll's axial movement is analyzed, some methods proposed.

从装配因素和波米尼445 - HS轧机本身的结构因素方面，分析了造成轧机轧辊轴向窜动的原因，提出了解决办法。

7·According to analyze the reason of roller axial movement, this paper introduces the principle of axial immovable frame of short-stress line mill roller.

通过分析短应力线轧机轧辊轴向窜动的原因，阐述了其轴向固定结构原理。

8·At least one blade Angle bearing of a pair of such bearings permits an axial movement of the respective tension or carrier bar, whereby the latter is able to take up bending loads.

至少有一个叶片角度轴承的一对，如轴承许可证的轴向运动各自的紧张或承运人的酒吧，而后者则是能够采取行动的弯曲载荷。

9·Through axial movement of work roll and cooperating with hydraulic bending roll technology, WRS rolling mill can increase plate shape controlling capability and can improve edge thinning of plate.

WRS轧机通过工作辊的轴向移动，配合液压弯辊技术，提高了板形控制，改善了边部减薄。

10·The wave washers (56) apply a resistive force against axial movement of the clutch disk (38) from a coupled state, at which the input disk (28) is coupled with the clutch disk (38) to rotate together.

波形垫圈（56）施加抵抗力，以抵抗离合器圆盘（38）从输 入圆盘（28）与离合器圆盘（38）连接以一起旋转的连接状态的轴向运 动。