全部

1·The optimal burden ratio of sintered chromite is 60-65%.

冶炼中烧结铬矿的搭配比例以60—65%为佳。

2·Is China's largest sintered NdFeB magnet production, one.

是中国最大的烧结钕铁硼磁体生产企业之一。

3·This will then be sintered in a suitable atmosphere to yield the required product.

然后放入合适的环境中烧结成所需产品。

4·China has still a large number of residential construction using sintered clay brick.

中国仍然有大量的住宅建筑使用烧结粘土砖。

5·The microstructure and mechanical properties of the sintered compact were investigated.

研究了烧结体的显微组织和力学性能。

6·Sintered properties of the oil pump gears and part to part consistency are also reported.

还报告了油泵齿轮烧结后的性能和零件间性能的均一性。

7·The characteristics of metal powder for producing the sintered metallic filter was studied.

研究了生产烧结金属过滤器的原料粉末的性能特征。

8·Optimize the dielectric properties of low temperature sintered microwave dielectric ceramics.

优化低温烧结微波介质陶瓷介电性能。

9·Study has been made on preparation process of sintered brick with 80% flay ash and plasticizer.

对掺塑化剂，粉煤灰掺量达80%的烧结砖的制备工艺进行了研究。

10·The effect of raw material powder on the sintered properties of Boron Carbide was investigated.

研究了原料粉末对碳化硼陶瓷常压烧结性能的影响。

烧结

1·The application of powder injection molding in the production of bonded magnets and sintered magnets were discussed.

讨论了粉末注射成形在粘结磁体生产中的应用和烧结磁体研究开发的现状。

2·Powder forged parts generally are not as close to final size or shape as cold pressed and sintered parts.

粉末锻造零件通常不像冷挤压和烧结零件那样接近最终尺寸或形状。

3·China has still a large number of residential construction using sintered clay brick.

中国仍然有大量的住宅建筑使用烧结粘土砖。

4·However, the high temperature sintered body strength slightly lower, mainly for the use of low temperature environment.

但是烧结体的高温强度稍低，主要用于使用温度较低的环境。

5·Made by mixing elemental or alloy powders and compacting the mixture in a die, the resultant shapes are then sintered or heated in a controlled atmosphere furnace.

通过混合元素或合金粉末并在模具中压实混合物，再烧结或在环境可控炉内加热制成最终形状。

(1)sintered metal烧结金属

(1)sintered iron烧结铁