全部

1·The factors affecting the quality of chitin and chitosan fibers were described, including chitin and chitosan quality, solvent for spinning dope and its concentration and coagulation bath.

概述了影响甲壳素和甲壳胺纤维质量的因素，如甲壳素和甲壳胺的品质、纺丝原液的溶剂选择及浓度的确定、凝固浴的确定；

2·The results show that spinning and fiber properties are influenced by the concentration of the solvent in the coagulating bath and the temperature of the coagulating bath.

结果表明：凝固浴中溶剂浓度对纺丝过程及纤维强度有重要影响，而凝固浴温度对纤维的影响相对较小；

3·The effects of spinning dope concentration, coagulation bath temperature and addition of persimmon leaves on the mechanical properties of blend fiber were studied.

研究了纺丝原液浓度、凝固浴温度、柿叶添加量对共混纤维的力学性能的影响。

4·Writer describe that the quality of chitin amine and chitin amine, choice of solvent, density of spinning liquid and setting bath will influence the quality of chitin and chitin amine fiber.

阐述了影响其质量的因素有原料的质量、溶剂的选择、纺丝液浓度的确定、凝固浴的确定等方面。

5·The concentration and temperature of the coagulation bath and spinning conditions all have a great effect on structures and properties of PVDF/PVC hollow fiber membranes.

凝胶浴的浓度和温度、纺丝工艺等都会影响共混体系的相容性并改变膜的结构和性能。

6·The maximum spinning speed decreased with the coagulation bath concentration increasing.

最大导丝速度也随凝固浴浓度的增大下降。

7·Several spinning procedure conditions were discussed, such as coagulation bath concentration, temperature, extruding rate and core layer liquid flow rate etc.

并对凝固浴浓度和温度、挤出速率、芯液流量等纺丝工艺条件进行了探讨。

8·Fiber formation, appearance and properties at least depended on spin dope concentration, coagulation bath composition and concentration, and post-spinning draw.

分析认为纺丝液的浓度、凝固浴组成与浓度、拉伸对丝纤维的物理与机械性能均有影响。

9·It pointed out that the temperature of spinning solution, negative stretching, temperature of coagulation bath, concentration, flow and spin-finish had influence on quality of flat fiber.

指出原液温度、负拉伸、凝固浴温度、浓度、流量以及所用的油剂都会对扁平纤维的质量产生影响。