全部

1·A newly developed BBH pre - vacuum - pumping carburizing furnace has been introduced in this paper.

介绍了新研制的预抽真空式可控气氛气体渗碳炉。

2·When designing a continuous type carburizing furnace, it is necessary to take account of degreasing.

连续式渗碳炉设计时，应考虑脱脂问题。

3·CYCLE time: Amount of time product spends in a furnace at specified temperature for the purpose of carburizing or hardening product.

周期：产品在炉中某特定温度下渗碳或硬化所需要的时间。

4·Taking the automotive rear axle gear as an example, the design and adjusting of nitrogen-based atmosphere carburizing process were conducted on the new-built mult-purpose chamber furnace.

以汽车后桥齿轮为实例，在新制造的箱式多用炉上进行了氮基气氛渗碳淬火工艺的设计、调试和检测。

5·Rapid carburizing process by increasing furnace pressure is introduced and its mechanism is analysed.

介绍了快速压力渗碳工艺，并对其机理进行了分析。

6·According to carburizing steel's chemical composition and ore's case carbon requirements, the carbon potential of furnace inside atmosphere is controlled quantitatively.

根据所采用渗碳钢的化学成分及渗件表面合联量，对炉气联势进行定量控制。

7·The furnace atmosphere was calculated under the condition of carburizing in the nitrogen-methanol based atmosphere in this paper.

本文是采用氮、甲醇基渗碳气氛渗碳，对炉内气氛进行计算。

8·The process problems of ionic carburizing were studied with the furnace made by ourself.

用自行研制的多用途离子热处理炉研究了离子渗碳的有关工艺问题。

9·Before 1949, Beijing has heat treatment furnace, salt dissolved by thermocouples means furnace, quenching and tempering, parts of annealing, normalizing, quenching and tempering, carburizing and etc.

热处理1949年前，北京已采用电炉、盐溶炉、热电偶等手段进行零件退火、回火、淬火、正火、调质、渗碳等热处理。

10·The vacuum furnace is adapted to meet both vacuum sintering and carburizing at negative pressure.

负压渗碳的设备是对真空炉进行改造，使得真空炉能够进行真空烧结和气氛负压渗碳。