全部

1·Two types of indexing milling cutter has been designed by the author.

开发设计了组合式、整体式两类高速可转位面铣刀产品。

2·Low sprang force, May avoid the milling cutter or the drill bit break.

弹簧力较小，可避免小铣刀或钻头断裂。

3·Specification: twist drill, three-blade drill, reamer, end-milling cutter.

规格：麻花钻、三刃钻、铰刀、立铣刀。

4·The bevel milling cutter for cutting groove of oil casing-pipes was designed.

设计了用于油气田管道坡口切割的角度铣刀。

5·The bevel milling cutter for cutting groove of oil casing - pipes was designed.

设计了用于油气田管道坡口切割的角度铣刀。

6·According to the theory, a plane machining method by end milling cutter is given.

并且根据这一理论，给出端铣刀立铣加工平面的计算方法。

7·Single-edged aluminum milling cutter----the best end mill for various aluminum panel.

单刃铝用铣刀-------最适合雕刻机加工切割铣削各种铝板。

8·Milling: removes metal with a revolving, multiple cutting edge tool called milling cutter.

铣削用一个称为“铣刀”的旋转多刃刀具进行金属切削。

9·The latter simulates a milling cutter with an extremely large number of miniature cutting edges.

磨轮用非常大量的微型切削刃模仿铣刀进行切削。

10·The problem of designing an assembly type formed milling cutter is how to design the edge curve.

而铣刀刀刃曲线设计正是装配式成形铣刀设计的技术难点。

铣刀

1·This paper briefly introduces the concept of oblique cut in economical LOM for metal part, mainly researches on material, structure and parameters of special oblique milling cutter.

简要介绍经济型金属零件LOM技术倾斜切削的概念，重点对倾斜切削专用铣刀的材料、结构及几何参数进行了研究。

2·This paper simplifies the gear change calculation and machine adjustment in machining equiangular helix conical milling cutter with non-circular gear method.

本文着重介绍了用非圆齿轮法加工等螺旋角锥铣刀时，使挂轮计算和调整最简化的问题。

3·The assembly type formed milling cutter is widely applied in manufacturing complicated curve surface because of its advantages of adjustability and changeability.

装配式成形铣刀由于其可调性和可换性等优点，在加工复杂曲面中得到广泛应用。

4·Mainly Renmo milling cutter, reamer, pulling knives, plate-shaped lathe tool, knife inserted teeth and bore drilling.

主要用于刃磨铣刀、铰刀、拉刀、盘形车刀、插齿刀及扩孔钻等。

5·Four shafts linkage NC milling machine is used for polishing impeller of an expending machine, which finger - like milling cutter and NC system is designed.

采用四轴联动数控铣床及自行设计的指状铣刀和数控程序，对膨胀机叶轮进行光整加工。