全部

1·P Prestressing tendons shall have adequate fatigue strength.

钢筋必须有足够的疲劳强度。

2·It shows that fatigue strength of bolt can be improved by use of elastic cell.

有力说明了利用弹性元件可以达到提高螺栓疲劳强度的目的。

3·A reliability design method is presented for fatigue strength of turbine blades.

本文提出了透平叶片疲劳强度的可靠性设计方法。

4·The residual stresses impacts the working performance and fatigue strength of parts.

已加工表面存在的残余应力影响工件的使用性能和疲劳强度。

5·Fatigue strength of BINGO9000 semisubmersible drilling rig is analyzed in this paper.

本文对BINGO 9000半潜式钻井平台进行了疲劳强度分析。

6·Fatigue strength of the MIM specimens declined with increasing tempering temperature.

MIM钢试样的疲劳强度随着回火温度升高而减低。

7·P Where fatigue strength is required it shall be verified in accordance with en 10080.

当对疲劳强度有要求时，必须按照EN 10080进行检验。

8·Casting defects, especially porosity, will reduce fatigue strength of the crank-shaft.

铸造缺陷，尤其是铸造缩松，降低了曲轴的疲劳强度。

9·Then recommended values in fatigue strength design of ordinary steel bar are proposed.

并且给出了相应应力比下普通钢筋的疲劳设计强度建议值。

10·Fatigue strength is less than static stress strength such as elasticity limit, yield strength.

疲劳强度低于弹性极限或屈服强度等静应力强度。