全部

1·To reduce the leakage flux and improve the air gap flux density, auxiliary poles are added to the rotor structure.

为了减少切向结构永磁同步电机转轴侧永磁体的漏磁，提高气隙磁密，在切向结构永磁同步电机中合理引入辅助永磁体。

2·The fundamental flux in the air gap and the leakage flux coefficient from the computation are validated through the test.

由此得到的气隙基波磁通和漏磁系数与试验求得值均相吻合。

3·How to research stray losses and temperature rise on metal parts caused by leakage flux is difficult task for transformer design.

如何研究由于漏磁引起的附加损耗以及在金属构件中的温升是变压器设计的难题。

4·The result shows that there is high rate of recognition about the little defect on the thin steel pipe by alternative current magnetic leakage flux method.

结果表明，该交变漏磁法对钢管表面较小裂纹具有较高的检出率。

5·Based on the magnetic leakage flux technique, the principle of localized defect inspection and wall thickness measurement in oil well tubing has been researched.

文中研究了油管局部缺陷和壁厚减薄缺陷的漏磁场检测原理。

6·For the magnetic leakage flux system for steel tube flaw online inspection, normally multi-sensor technique is used to ensure the detecting speed and sensibility.

钢管在线漏磁检测中为保证检测的速度及灵敏度，一般采用多路传感器检测技术。

7·The sensor can be fixed under the electromotor's end bracket. Leakage flux of motor stator and rotor does not affect the activity and measuring accuracy of the sensor.

该传感器可以安装在电动机内端盖处，电机定子与转子端部漏磁都不影响传感器的工作和测量精度。

8·The on-line pipe flaw detector with magnetic leakage flux principle is introduced, providing details regarding the exciter circuit structure, magnetic sensors and signal processing.

介绍了基于漏磁探伤原理的钢管管缝在线检测装置，对装置的励磁磁路结构、磁敏感检测元件及其信号处理作了较详细的分析论述。

9·Alternative magnetic leakage flux method was developed from the eddy current testing and traditional magnetic leakage flux testing, and it was advantageous for surface flaw recognition.

交变漏磁检测方法由于兼具涡流检测和传统漏磁检测的特点，对表面缺陷具有很高的识别率。

10·Within the blind Angle area of the Amalog Sonoscope leakage flux inspection system, the rotary rolling caused flaws in seamless steel pipes were missed quite often due to low detection sensitivity.

无缝钢管表面的斜轧缺陷，因位于漏磁纵横向检测机组的盲角区域，检测灵敏度低，容易漏检。