全部

1·Mainly used for welding different type of steel and clad steel or similar kind of austenitic steel.

主要用于异种钢或复合钢的焊接或用于焊接相应成分的奥式体钢。

2·Experiments show that the method is not only easy to implement, but also effective for identifying austenitic steel defect.

实验结果表明，此方法简单易行，且能较好地实现奥氏体的缺陷识别。

3·The strength, toughness and surface hardness of medium Manganese austenitic steel have been increased greatly by casting surface alloying and complex modification.

通过铸造表面合金化和复合变质处理，使中锰奥氏体钢的强度、韧性和表面硬度显著提高。

4·The results show that a compound layer with good wear-resistance and corrosion resistance can be gained in 304 austenitic steel by chromizing sbusequent solid soluti…

结果表明，304奥氏体不锈钢经渗铬固溶渗氮复合处理后可获得性能优良的复合渗层，且耐磨、耐腐蚀。

5·The impact toughness, crack forming energy and crack extension energy of complex modified medium manganese austenitic steel. Are increased by 263%? 288% and 232% respectively.

复合变质中锰奥氏体钢的冲击韧度、裂纹形成功和裂纹扩展功分别比原来提高了263%、288%和232%。

6·In this paper, some corrosion failures of austenitic steel expansion joint in FCC unit are discussed, the factors affecting corrosion analysed and some prevention measures proposed.

本文列举奥氏体不锈钢膨胀节在催化裂化装置使用中发生腐蚀破坏事例，分析腐蚀破坏的各种因素，提出预防的一些措施。

7·The effects of change in microstructure and residual stress distribution on Barkhausen noise (BN) on the bainitic steel side in a welded bainitic and austenitic steel pipe are studied.

研究了焊接贝氏体-奥氏体钢管贝氏体钢侧显微组织变化和残余应力分布对巴克豪森噪声（BN）的影响。

8·For mass efficiency of penetration, martensite steel increases in line with strength, and nitrogen alloyed austenitic steel is much higher than that of the same strength martensite steel.

马氏体钢抗杆式模拟弹防护系数随着强度的提高而提高，呈线性关系，含氮奥氏体钢穿甲防护系数远远高于同一强度级别的马氏体钢。

9·Austenitic stainless steel including clad plate shall generally be subjected to cold forming.

奥氏体不锈钢包括包装板通常使用冷成型。

10·High purity water systems are primarily composed of austenitic stainless steel (ss) materials due to their corrosion resistant and contaminant free properties.

考虑到铬镍不锈钢(SS)的抗腐蚀和防污染性，高纯水系统基本上都是由铬镍不锈钢材料构成。