全部

1·The influence of the variable ratio on the slip and contact stress is also discovered.

揭示了速比变化比值对齿面滑移及齿面接触应力特性的影响。

2·But in the textbook about CAM, the contact stress calculating process is seldom discussed.

但在有关凸轮的教科书中，对接触应力的计算过程论述较少。

3·The plane stress theory is applied to analyze the contact stress between cast track and roll wheel.

采用平面应力理论来分析滚轮与轨道的接触应力问题。

4·Beased on the theory of Hertz stress, the contact stress of roller bearing is analysed in this paper.

依据赫兹接触强度计算理论，着重研究了圆柱滚子轴承内、外圈及滚动体的接触应力。

5·Rail-wheel contact stress depends to a large extent on the matching of rail-wheel geometry parameters.

轮轨接触几何参数的匹配优劣直接影响着轮轨接触应力值的大小。

6·The distribution of the contact stress of FG is obtained in the different meshing locations during the meshing.

获得了在啮合过程中不同的啮合位置面齿轮的接触应力的分布规律。

7·The influence of pneumatic pressure, sealed pressure and axial diameter on normal contact stress was discussed.

讨论了充气压力、密封压力与充气压力比、轴径对法向接触应力的影响。

8·In this paper, an electric device is proposed to measure contact stress on the sealing surface of sealing elements.

介绍了西北工业大学研制的密封面接触应力的电测装置。

9·Sphere contact as object, contact stress and distortion formula of Hertz are deduced theoretically from the modeling.

文中以球体静态接触为对象，建立模型并推导出赫兹接触应力、变形公式。

10·However the contact stress between slips and casing is very complex, it is extremely difficult to study directly in theory.

然而卡瓦和套管间形成非常复杂的接触压力，从理论上直接研究非常困难。