全部

1·So this whole portion here is plastic flow.

这部分都是塑性流动。

2·Yay! Now you're clearly in that plastic flow portion.

现在你能很清楚看到，塑性流动的部分。

3·Increase in pressure and temperature improves plastic flow.

压力和温度的增加可改进塑性流变。

4·For vertical and inclined surface shape. No plastic flow phenomena.

用于倾斜和垂直面上成型，不会出现流胶现象。

5·One unique threat to well integrity from salt zones is plastic flow.

盐层的塑性流动对井筒完整性是巨大的威胁，会对水泥环、套管造成破坏。

6·Plastic flow failure is mainly induced by building up of excess-static pore pressure.

塑性流动失稳破坏是由孔隙水压力的累积作用起主导作用；

7·The sensitivities of the plastic flow stress to strain rate and temperature are analyzed.

分析比较了合金流变应力对温度及应变率的敏感性。

8·If the die material is transparent, the process of the plastic flow can be observed easily.

如果将模具用透明材料制造，则可就地观察到塑性流动的整个过程。

9·Most of the cracks would propagate along the direction of plastic flow into the inside of the rail.

在靠近钢轨表面一定的深度内，裂纹萌生后基本上沿着塑性流变的方向向钢轨内部斜向下扩展。

10·If, when the stress is removed, the deformation remains, the material is said to exhibit plastic flow.

如果在撤去应力后变形仍保留，则称此材料呈现塑性流动。