全部

1·At last, specifications of Hull cell test are also discussed.

最后，对采用霍尔槽进行试验的规范也作了详细的论述。

2·The optimum bath formula and process conditions were obtained by Hull Cell test.

通过赫尔槽试验优选出最佳镀液配方和工艺条件。

3·Effects of each component content in solution, process conditions, power source on appearance of Sn deposit were studied by Hull Cell test.

通过赫尔槽试验研究了镀液中各成分含量、操作条件及电源对镀层外观的影响。

4·In this article, the basic theory of Hull Cell Testing and its application in electroplating process for printing circuit board is explained.

本文主要阐述赫尔槽基本原理及其在印制电路板电镀过程中的应用。

5·The Rectifiers for the Hull Cell Test are expressly designed units, which utilize filtered circuits capable of continuously producing minimum AC ripple.

我们的这款整流器，专用于薄膜电池测试使用，可连续产生交流波纹。

6·Hull cell normally provides information about the performance of a plating process over a wide range of current densities in a single experiment and has a limitation in solution agitation.

赫尔槽实验可以在很宽的电流密度范围内提供电沉积过程的信息，但受到溶液搅拌的限制。

7·In order to obtain better semi-bright nickel coating, a new process was studied based on the selection of additive agents for semi-bright nickel electroplating solution with hull cell tests.

为获得较好的半光亮镍镀层，通过霍尔槽试验对镀镍液添加剂进行筛选，研究一种半光亮镀镍工艺。