全部

1·The linear shrinkage of green bodies showed an increase firstly but decreased with further increase in the carbon black content.

随着炭黑含量的增加，成形坯体的线型收缩先减小后增大，坯体的强度则逐渐降低。

2·A new type of multi-function system for testing linear shrinkage, stress and hot cracking of casting alloy is introduced in the paper.

介绍一种新型铸造合金线收缩-应力-热裂特性综合测试系统。

3·A new multifunctional device for testing linear shrinkage, stress and heat check of casting alloy easily and quickly is developed in the paper.

本文研制一种新型铸造合金线收缩-应力-热裂特性多功能测定仪，它可以方便准确的测定金属热裂、应力、线收缩特性。

4·The effects of pyrolysis temperature and soaking time on ceramic yield, linear shrinkage, mechanical properties and microstucture were investigated.

研究了热懈温度和保温时间对陶瓷产率、线收缩率、力学性能以及微观结构的影响。

5·The influence of densification and strength for sintering temperature were investigated by density, linear shrinkage and flexural strength were measured.

通过测定其相对密度、线收缩率和抗弯强度，研究温度对材料致密化和强度的影响。

6·But the instruments of testing heat check, stress and linear shrinkage of casting alloy at present are not only inconvenient in operation but also unitary in function.

已有的测定铸造合金热裂、应力、线收缩参数的仪器不仅操作不便，而且功能单一。

7·The influence of sintering temperature on mechanical properties of alloys was investigated by measuring their density, linear shrinkage, tensile strength and hardness.

通过测定其相对密度、线收缩率、拉伸强度和硬度，研究了烧结温度对合金性能的影响。

8·The quantitative relationship between water content and linear shrinkage ratio is gained under different dry density for Mengzi expansive soil, which has great value to engineering practice.

试验得出了蒙自膨胀土不同干密度条件下含水量与线缩率的定量关系，对工程实践有一定的参考价值。

9·A general rule of thumb for conventional room-temperature cured polyesters is 1/32 inch of shrinkage per linear foot when reinforced with 25 weight percent glass content.

常规室温下固化聚酯的经验法则是：直线每一英尺的收缩量为1/32英寸（当加强玻纤重量比为25%时）。

10·The making of same spinneret differential linear density and differential shrinkage filaments is of great value to the wool-like researches of man-made filaments.

在化纤长丝短纤维化的研究工作中，同板异纤度异收缩丝的制取具有重要意义。