全部

1·Obtaining of setting value of track of regular curve .

规则曲线的轨迹设定值的获取。

2·Except for above, it is not necessary to change an initial setting value.

除了上面的，其他的不必修改，保持初始值。

3·Temperature control card protects setting value and avoids change by mistake.

温度控制卡设计， 保护设定的温度值， 防止误改。

4·The oldest clips will be erased automatically when the total size of clips exceeds the setting value.

最古老的片段将被删除时自动剪辑的总大小超过设定值。

5·As the cold water flow through the heater, the water temperature was quickly reached the setting value.

它具有控制水温的装置，当冷水流过加热器时，可以使水的温度快速提高至设定值。

6·In addition, the rotation feedback control is added to keep the practical rotation speed at setting value when FPC stands by.

此外，还附加了转速反馈控制，使FPC转速在其待机时总是能保持在稳态给定转速。

7·Analyzed to the process parameters of EAF, We propose the smelting optimizing goal and determine the optimization setting value.

对过程参数进行了分析，提出了冶炼工艺优化目标并确定了优化设定值。

8·The control system of the compressor adopts frequency conversion to control, its frequency setting value is decided by the non-linear link.

压缩机控制系统采用变频控制，其频率给定值由非线性环节来决定。

9·We should always check the high voltage DC power supply within the current relay, time relay setting value is correct, control is sensitive.

应经常检查高压直流电源内电流继电器，时间继电器的整定值是否正确，控制是否灵敏。

10·The pointer offset value and sensor gain setting value selected by this operation are not initialized by SETUP RESET or DEFAULT SET operation.

这里操作选定的指针偏差值和感应增益设定值不用“归零设定”或“错误重调”来清除。

设定值

1·Obtaining of setting value of track of regular curve .

规则曲线的轨迹设定值的获取。

2·The oldest clips will be erased automatically when the total size of clips exceeds the setting value.

最古老的片段将被删除时自动剪辑的总大小超过设定值。