全部

1·A plasma rotating electrode process (PREP) equipment, process parameters and powder forming mechanism were introduced.

介绍了等离子旋转电极工艺(PREP)制粉设备、主要工艺参数和粉末形成机理。

2·In addition, this paper also made a research on the milled powder forming technology, and presented some improvement methods.

此外，还对球磨后的粉末成型工艺进行了探索，提出了改进意见。

3·Special sophisticated equipments: special CNC machine tools, powder forming machines, environmental-protection complete equipments.

专用高端装备：专用数控机床、粉体成型设备、环保专用成套设备。

4·At present, the hot research spot about the powder forming hydraulic press is the application of electro-hydraulic proportional technology in the powder forming hydraulic press.

目前，关于粉末成形液压机的研究热点是电液比例技术在粉末成形液压机中的应用。

5·In this paper, theoretical research, physical experiment and numerical simulation are combined to systematically study the Aluminum powder forming discipline and compacting mechanism.

本论文运用理论研究、物理实验和有限元数值模拟相结合，系统地研究了粉末成形规律及其致密化机制。

6·The bubbles fragment, forming ultra-tiny drops, and when these dry they leave a powder with granules that are between one and five microns across.

而这些泡沫就构成了超小的液滴，干燥之后就成了粉末，其颗粒大小在一到五微米之间。

7·Components or articles are produced by forming a mass of powder into a shape, then consolidating to form inter-particle metallurgical bonds.

通过将大量的粉末放入模具成型为零件或物品，然后合成为内有微粒的冶金结合物。

8·On the bases of comparing against routine processing method, clarify the superiority of powder metallurgy forming for the miniature cylinder.

在与常规加工方法比较的基础上，阐明了该微型气缸采用粉末冶金方法成形的优越性。

9·The forming mechanism for the crack produced in the process of laser forming 316l stainless steel powder alloy has been studied in the paper by micro measurements.

采用微观测试分析方法，针对316 L不锈钢粉末，深入研究了激光快速成形过程中熔覆层的开裂行为及其形成机理。

10·In addition, with the increasing of the milling speed and the ratio of ball to powder, the speed of the amorphous forming is fast.

另外，在球磨时间固定的情况下，球磨比例越大、球磨速度越高，粉末所获得的能量越高，形成非晶的速度越快。