全部

1·This model is used to simulate 2_dimension vortex flow phenomenon.

用该模型模拟了二维的涡旋现象。

2·Vortex flow meter, pressure sensor and thermal couple are installed on the platform.

新的实验台增加了压力传感器、涡轮流量计和热电偶等自动测量传感器和仪表。

3·It can be applied to measure the parameters of the air vortex flow field in wind tunnel test.

可应用于风洞试验中测量空气旋涡流场参量。

4·It is verified that the design method of free vortex flow is still important in advanced turbine design.

证明了自由涡的设计方法在现代先进涡轮设计中仍占有重要的地位。

5·The results, compared with non vortex flow, are that effect of vortex flow on forced heat transfer is obvious.

实验表明，涡旋流动有明显的强化传热作用。

6·The advantage and disadvantage of free vortex flow method are summarized through analyzing the overall design.

通过对整体设计过程的分析，有针对性的总结了自由涡设计方法的优劣。

7·New technique is applied to reconstruct the diversion tunnel to the vortex flow tunnel with energy dissipation.

应用新技术将导流洞改建成旋流消能泄洪洞。

8·Vortex flow meter, mainly for industrial flow measurement fluid media channels, such as gas, liquid, vapor and other media.

涡街流量计，主要用于工业管道介质流体的流量测量，如气体、液体、蒸气等多种介质。

9·A unsteady large eddy simulation was used to model molten steel flow in a continuous casting mold to analyze the vortex flow.

为了研究结晶器内钢液涡流现象的形成机理，采用大涡模拟方法对此涡流现象进行模拟。

10·The vortex is one of the important features of flow field. This paper detects the vortex flow based on pattern matching method.

涡流是流场的重要特征之一，本文采用基于模板匹配的方法来识别流场的涡流特征。

涡流

1·The vortex flow and mold flux entrapment in the thin slab continuous casting mold was investigated using a 1/4 scale water model.

利用1/4水模型对薄板坯连铸结晶器内的涡流及卷渣行为进行观察研究。