全部

1·The starter drive gear is mounted on the armature shaft.

启动机驱动安装在电枢转轴上的齿轮。

2·The armature shaft shall not be bent more than 0.003 in.

更好。原来生产的有环氧层的电枢没有重新锡焊和再装轴的不必再浸漆。

3·The motor housing encloses the armature and pole pieces, holds the bearings that support the armature shaft, and provides the terminals for connecting the motor to the rest of the staring system.

启动机外壳内装入电枢与磁极，外壳两端的轴承支撑电枢转轴，并将启动机与启动系统支架相连。

4·These reliable direct current generators provide a voltage output directly proportional to the rotational speed of the armature shaft and are specifically designed for speed control applications.

这款可靠的直流发电机可根据电枢轴的旋转速度直接提供电压输出值，该设计应用于速度控制应用领域。

5·The voltage between the system and generator must be small enough to ensure minor current in the armature winding of generator, avoiding the impact to the coupling shaft.

发电机电压与系统电压之差必须足够小，避免合闸时发电机电枢绕组电流过大，对发电机联轴系统产生冲击。

6·The phase and frequency between the system and generator must be small enough to ensure minor current in the armature winding of generator, avoiding the impact to the coupling shaft.

避免由于压差、频差和相角差太大，使的合闸时，发电机组电枢绕组电流过大，对发电机组联轴系统产生冲击。

7·Pulse electromagnetic DC motors, in their simplest form, consist of electromagnet with armature and ratchet wheel mounted on shaft. The right end of armature carries pawl.

脉冲直流电机的最简单结构形式是由固定在架子上的线圈和棘轮组成，线圈的右端装有棘爪。