全部

1·Feed speed with variable speed.

进速度采用无级调速。

2·The feed speed is automatically adjustable on line and this interpolation method can be applied to...

本方法可以实时自动调整进给速度，可用于自适应切削加工过程和柔性制造加工。

3·The thrust is greatly affected by the feed speed while the torque is obviously affected by drill geometries.

进给速度对轴向力的影响较大，而钻头几何形状对扭矩的影响较大。

4·The feed speed is automatically adjustable on line and this interpolation method can be applied to the adaptive…

本方法可以实时自动调整进给速度，可用于自适应切削加工过程和柔性制造加工。

5·In the MIG with filler wire. With the increase of wire feed speed, transition coefficient of Zn trend to decrease.

MIG填丝焊接过程中，随着填入锡黄铜焊丝速度的加快，锌元素的过渡系数有减小的趋势。

6·The three schemes for feed control not only effectively control the feed speed of the semi-floating plug but also sui...

以上三种控制方案，不仅能有效地控制半浮芯棒的速度，还能适用于其它场合动力性负载的速度控制。

7·The three schemes for feed control not only effectively control the feed speed of the semi-floating plug but also suit the speed...

以上三种控制方案，不仅能有效地控制半浮芯棒的速度，还能适用于其它场合动力性负载的速度控制。

8·Vibrating direction Angle and motor speed has great impact on the vibrating system and stuff feed speed of grain clearing equipment.

振动方向角和电机转速对粮食清理设备的振动体制和物料推进速度有很大影响。

9·Based on test data, we made a qualitative analysis for feed speed, die form, extrusion components, water quantity and spindle speed.

本文根据试验数据就喂料速度、出料方式、挤压部件、加水量和主轴转速对挤压机性能的影响，作了定性分析。

10·The results show that the effects on surface roughness are feed speed, depth of cutting , tool rake angle and parts hardness in turn.

结果表明：工件进给速度对表面粗糙度的影响最大，切削深度和刀具前角次之，工件硬度影响最小。