全部

1·Electrical pulse (EDM), line cutting, mold Etching.

电脉冲(电火花)，线切割，模具烂花。

2·The shape, or waveform, of the electrical pulse used is crucial.

所用的电脉冲的波形非常重要。

3·Electrical pulse; the distribution of electric field; electroporation.

电脉冲；电场分布；电穿孔。

4·Electrical pulse treatment can rescue s segregation to a large extent.

经电脉冲处理后，对铸坯中s元素的偏析有较大的改善。

5·This means an electrical pulse can pace both ventricles, resynchronising them.

这就意味着电子脉冲可以为两心室同步调节调节振动频率。

6·The parameters, design scheme and operation principle for the aerospace electrical pulse igniter were given.

给出了航天电脉冲点火器的参数、设计方案和工作原理。

7·This paper offers a new method for strain-gage measurements in which a synchronized electrical pulse is used.

本文提出了对电阻应变片采用脉冲加电来测量静态应变的方案。

8·Filed application shows that electrical pulse blocking removing technology can effectively stimulate oil layer...

应用表明，电脉冲解堵对中高含水期的油层解堵具有较好的增产效果。

9·Selecting suitable detecting frequency band is the key issue in detecting partial charge through electrical pulse.

电脉冲法检测局部放电的关键问题是确定合适的检测频带。

10·Whereas it can take several minutes for hot gas to get the ice out of the mold, a high-power electrical pulse takes about four seconds.

之前用燃气加热，需要几分钟才能把冰从模具里取出，而利用电脉冲法，只需要四秒就可以完成。

电脉冲

1·The electrical pulse sharpening effect in ferrite transmission lines and the dependence of transmission speed of voltage wavefront on the bias magnetization current have been observed in detail.

实验测量了铁氧体传输线对高压电脉冲的前沿锐化效应以及偏置磁化电流对电压波波前传输速度的影响。

2·Bying adding an oscillator mirror in the imaging path, thus the enlarged image will be scanned by the narrower slit, and the optical boundary information is converted into gradient electrical pulse.

在显微物镜的成象光路中，增加一块振荡反射镜，使被测线宽的放大象相对窄缝扫描，将光学边界信息转变为梯形电脉冲。

3·The parameters, design scheme and operation principle for the aerospace electrical pulse igniter were given.

给出了航天电脉冲点火器的参数、设计方案和工作原理。

4·Electrical pulse (EDM), line cutting, mold Etching.

电脉冲(电火花)，线切割，模具烂花。

5·BIOROCK sculptures are metal rods that have an electrical pulse flowing through them at all times (mostly powered by solar or wind energy).

“生物岩”雕塑有一个电脉冲通过他们在任何时候(大多是由太阳能或风能供电)流动的金属棒。