全部

1·Zinc coating was prepared using mechanical plating technology for the deposition of small amount tin salt.

采用少锡盐沉积机械镀锌工艺制备了机械镀锌的镀层。

2·Some hydrogen is absorbed during the acid cleaning and processing procedure of the mechanical plating process.

经过酸洗并机械镀的零件会吸收一些氢。

3·We also introduced the principle and process of mechanical plating which is beneficial to environmental controlling.

并介绍了机械镀锌这一新的利于环境控制的镀锌工艺的原理和工艺过程。

4·Zinc based RE alloy coating was obtained on the surface of steel samples by adding RE metal salts during the mechanical plating process.

通过在机械镀锌过程中添加不同量的稀土金属盐，在钢铁试样表面形成不同成分含量的锌基稀土合金镀层。

5·The quality requirements of glass beads in mechanical plating were analyzed, including circle forming ratio, surface roughness and wear resistance.

分析了机械镀锌工艺对玻璃珠冲击介质的质量要求，包括成圆率、表面光洁度和耐磨性能；

6·The performances of different impact media were compared. The results show that the glass bead is the best choice of impact media for mechanical plating.

对比了不同种类冲击介质的物化特性，指出玻璃珠是机械镀锌冲击介质的最佳选择。

7·Based on Zinc and Zn-Al alloy mechanical plating, a new Zn-Ni alloy mechanical plating process is developed through adjusting type and dosage of activators and promoters.

在机械镀锌、锌铝工艺的基础上，通过调整活化剂和促进剂的种类及用量，研制开发了机械镀锌镍合金工艺。

8·Surface quality adhesion to substrate and corrosion resistance of zinc coating of mechanical plating are described. The deposition model is proposed and is confirmed by experimental results.

阐述了机械镀锌层的表面质量、结合力及其耐蚀性，提出了机械镀锌的沉积过程模型。通过实验数据及分析加以验证。

9·Adsorption of zinc powders on surface of work pieces playes an important part in the process of mechanical plating, the strengthening and stabilizing adsorptions can increase the speed of deposition.

机械镀锌工艺中起关键作用的是锌粉团在工件上的吸附、强化和稳定这一过程可以提高沉积速度。

10·The influences of grain diameter, grain shape and zinc content of zinc powder on mechanical zinc plating were analyzed.

分析了锌粉的粒径、颗粒形状、金属锌含量对机械镀锌层的影响。