全部

1·The lining (4) and the cable shield layer (10) are welded as a whole.

衬套(4)与电缆屏蔽层(10)焊接为一体。

2·Make a conclusion about the problems, which are taken place in small cable connector assembly, discuss the key process plan and study the method, which are applied in the grounding of cable shield.

针对小型化视频连接器电缆组件装联过程中出现的故障进行了总结，讨论了电缆组件装联过程中关键工艺设计内容，着重探讨了电缆屏蔽线接地工艺。

3·With triax cable, the inner shield can be driven at guard potential in order to reduce cable leakage and minimize circuit rise times.

使用三同轴电缆时，为了减少电缆泄漏并尽量降低电路的上升时间，可以将内层屏蔽驱动到保护电位。

4·COAXIAL cable, an electrical cable usually connecting an antenna with a receiver or transmitter. The cable has an inner conductor and an outer grounded shield.

同轴电缆，一种通常用来联接天线与接收机或发射机的电缆。电缆由中心导体和外层的屏蔽所组成。

5·The lining and a shield layer outside a cable core line are connected as a whole.

衬套与电缆芯线外的屏蔽层连为一体。

6·Poor shield connection is one of the biggest sources of connection problems in the installation of coaxial cable.

不良的遮蔽连接是安装同轴电缆中，最大的连接问题的来源之一。

7·In this case, which seems to violate the no shield current rule for receiver circuits, the concentric cable is not used to shield the center lead; instead, the geometrv produces cancellation.

这个例子看起来违背了上文“屏蔽体一定不能有电流”的准则，但是这里屏蔽电缆并非用来屏蔽芯线，而是通过这种特殊接法抵消干扰。

8·An unbalanced line is generally a single-conductor shielded cable with the center conductor carrying the signal and the shield at ground potential.

对于非平衡式信号线来说，就是一根被屏蔽了的信号线，这个中心信号线传输信号，且相对于地电势。

9·To reduce the inductive voltage, shield cable is proposed, or connecting parallel capacitor to power-supply line temporarily.

为降低感应电压，提出了铺设屏蔽电缆或暂时在电源母线上并联电容器的解决方案。

10·Copper conductor PVC insulated PVC sheathed woven shield control cable.

铜芯聚氯乙烯绝缘聚氯乙烯护套编织屏蔽控制电缆。