全部

1·Next we disconnect the dock connector ribbon cable from the logic board.

接下来，我们基座衔接器断开从逻辑板带状电缆。

2·The serial converter is connected to the 6 pin header with a ribbon cable.

串口转换装置用排线连接到6 针插头上。

3·Disconnecting the touchscreen ribbon cable from its socket on the logic board.

断开从它在逻辑板上的触摸屏排线插座。

4·For this procedure you connect the serial converter with the large ribbon cable.

为了进行这一操作，你要把带排线的串口转换装置连接至板上。

5·The female connector is designed to be used to connect a ribbon cable using IDC technology.

母连接器就被设计成使用IDC技术的扁平电缆连接。

6·These sockets were then connected via a ribbon cable split to the FPGA using three headers.

这些座通过再劈成三个头的排线分接到FPGA。

7·This paper describes the water blocking mechanism and performance of slotted core fiber ribbon cable.

本文介绍了骨架式光纤带光缆的阻水机理和阻水性能。

8·In this article, we mainly research stranding fiber ribbon cable and side cladding multifiber ribbon.

主要研究层绞式带状光缆和边粘型大芯数光纤带。

9·Many components are mounted to a single ribbon cable, meaning that replacing one requires replacing them all.

l很多元件集成在一条电缆上，更换一种元件等于要更换整根电缆。

10·The developers kit includes instructions, interface ribbon cable, jumpers, mounting hardware, antenna and antenna cable.

该开发套件包括主板、使用手册、介面扁平电缆、跳线开关、安装配件、天线及天线电缆。