全部

1·After the adjustment ended, tighten the lock nut.

调整后，就将锁紧螺母拧紧。

2·Tang thread fastening and forced lock nut fastening.

即唐氏螺纹紧固及硬锁紧螺母紧固。

3·They are made up of sleeve, lock nut and lock washer.

它由称套、锁紧螺母、锁紧垫圈组成。

4·Remove the fast fill lever cap, and loosen the lock nut.

拆卸快速进水手柄帽，松开紧锁螺母。

5·Grasp upper and lower stem lock nut with wrench and loosen.

用扳手抓住上部和下部阀杆锁紧螺母并且松开。

6·Revolving the lock nut 5 anti-clockwise to the suitable position.

逆时针方向旋转锁紧螺母5，使其退到适当位置。

7·The two-piece Hard Lock Nut is easy to install, requiring only the use of a wrench.

双件套强力锁紧螺母安装简便，只需要一个扳手就行。

8·After completing adjustments, tighten the lock nut and replace the fast fill lever cap.

在调节完成后，紧固锁紧螺母，重新安装快速进水手柄帽。

9·Smaller sizes use a lock nut with a locking washer, larger sizes use a nut with locking clip.

小尺寸轴承使用带锁紧垫圈的锁紧螺母大尺寸的轴承使用带锁紧卡箍的锁紧螺母。

10·Loosen and remove the diaphragm lock nut and lock washer, pressure plate and diaphragm from the valve stem.

松开和拆卸隔膜锁紧螺母和锁紧垫圈，从阀杆上往下压阀盘和隔膜。