全部

1·The distinct difference between the numerical results and the experimental one at higher altitudes is due to anomalous heating of the F layer ionosphere.

更高高度上模拟结果和实验结果的偏差是由于模拟过程中没有考虑F层异常吸收的作用。

2·While Microsoft is encouraging developers to build the core of their applications using F#, for the presentation layer they are recommending VB and C# be used. Don Syme continues

虽然微软鼓励开发人员使用F#来构建应用程序的核心，但对于呈现层他们还是推荐使用VB和C#。

3·The experiments were made possible by a novel, one-layer ion trap cooled to minus 269 C (minus 452 F) with a liquid helium bath.

实验利用了一种单层离子势阱，并将其浸在液氦浴中冷却到零下269摄氏度。

4·This backing is used for one-side automatic welding to reinforce F/G layer. It is also easily used at bending parts.

本衬垫供单面自动焊接用F/G层的加强，也易用于弯曲部分。

5·Confinement loss can be effectively lowered by adding a layer of F-doped glass near the core of this fiber.

通过在靠近纤芯处加上一层掺氟玻璃，能有效降低带隙内光子的限制损耗。

6·The level of F-actin expression in the cytoplasm of outer layer is apparently higher than that of inner one, and this difference shows statistical significance.

内层细胞胞质中的F 肌动蛋白表达量较低，外层细胞胞质中的F 肌动蛋白表达量明显高于内层细胞，两者差异有统计学意义；

7·If it's between 10 and 40 degrees F, you can usually get away with a wicking base layer and an outer layer.

如果它在 10 和 40 度 F 之间，你能通常和灯心的材料恶劣的层和外部的层逃离。

8·Fiberglass sleeving coated with polyurethane is manufactured with non-alkali fiberglass braided sleeving and coated with a layer of polyurethane and than thermoset to form F grade insulating sleeving.

聚氨酯玻璃纤维软管系采用无碱玻璃纤维编织成管，并涂以改性聚氨酯树脂经加热烘干而成的F级绝缘软管。

9·This paper analyzes the architecture of the multi-granularity optical cross connector and proposes the layer graph f…

本文对多粒度交叉连接结构进行了分析，并对多粒度全光网中的多层联合路由问题进行了研究。