全部

1·The influence of various factors on the deviation Angle and loss was represented by components.

各种不同因素对落后角和损失的影响以分量的形式表示。

2·According to the changes of deviation Angle calculated the pressure distribution of directional well.

对定向井井筒压力分布，计算时根据井斜角的变化采取分段计算的方法。

3·The paper proposes a method of measuring wave length of light wave by using minimum deviation angle based on raster.

本文通过光栅衍射给出了用最小偏向角测光波波长的方法。

4·Formations were unconsolidated and hole deviation Angle was high, so it was difficult to recover cores from this well.

由于地层疏松，该井井斜角较大等造成取心难度大。

5·The mechanical model used to calculate this deviation angle of fault yields results which agree essentially with the observation.

并提出一个力学模型，计算了断层扩展角，计算结果与观测事实比较吻合。

6·Effects of mechanical heterogeneity on fracture toughness and crack deviation Angle of the joints were investigated by experiment.

通过试验研究了力学不均匀性对接头断裂韧性和裂纹开裂角的影响。

7·The extended reach well has such characteristics as large horizontal displacement, great deviation Angle and long open hole interval.

大位移井具有长水平位移、大井斜角以及长裸眼段的特点。

8·Calculation of practical data from oil fields demonstrates that formation sloughing pressure is dependent on deviation Angle and well azimuth.

对油田的实际资料进行计算表明，井壁坍塌压力与井斜度和井斜方位角有关。

9·Down coiler is one of the key equipment for hot strip mill, the deviation angle of tension roll is of great importance to biting into coiler successfully.

地下卷取机是热带钢连轧机的关键设备，张力辊的偏移角对于保证带钢顺利咬入具有重要的作用。

10·The compression work or the total pressure ratio of a compressor is determined through the use of cascade element performance data concerning deviation Angle.

压气机的加功量或增压比由其基元叶栅的落后角确定。